Pistenking Universalmodel American Style Truck Rear Lighting

Upgrade your 1/14 scale American style truck with the Pistenking Universalmodel American Truck Rear module set. Designed for installation at the rear bumper, these compact universal modules allow individual LEDs to be connected directly, with integrated resistors built into the unit.

No extra resistors are required for standard outputs. Just connect your LEDs and plug the module into the Kingbus lighting system for seamless operation.

Delivered ready to install and fully tested.

Key Features

• Designed for rear bumper installation

• Fully compatible with Kingbus lighting system

• Integrated resistors for standard LED outputs

• Color-marked LED connection points

• Plug and play connection

• Compact and lightweight design

Each outlet supports one LED connection. The color of the LED is indicated by a corresponding colored point on the module for easy identification.

Outlets marked HC allow multiple LEDs up to a total of 100mA. When using an HC outlet, the correct resistor must be installed between the module and the LEDs.

Available Outputs

• Parking lights

• Rear fog light

• Brake light via driving channel

• Back up light via driving channel or Kingpad

• Turn signals left and right

• Hazard flashers

• +5 Volt output

Technical Specifications

• Module Dimensions: 27 x 15 x 8mm (L x W x H)

• Cable Length: 150mm

Delivery Contents

• 2x Universal Rear Modules

• Installation Instructions

Clean wiring. Reliable function. Proper rear lighting control for serious 1/14 scale builds.